Sollatek Heavy duty stabilisation Wall mountable

Sollatek Heavy duty stabilisation Wall mountable

Sollatek Heavy duty stabilisation Wall mountable

  • Stablisation up to 75A
  • Direct wire connection(Terminal)
  • Wall mountable
  • High voltage stablisation
  • Low voltage stablisation
  • Spikes/surges protection
  • Power-back surges protection
  • Basic Lighting protection
  • AVS function
  • Startup time delay
  • +/- 6% stablisation
  • Solid state

EGP 4,100.00

Add to cart

Add to my wishlist

22 other products in the same category:

More info


The Sollatek SVS monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start up delay.

The SVS20, 35, 50 and 75 are heavy duty wall mountable stablisers with terminal input/output, for direct wiring and secure connectivity.


Stock No Model 
98220550SVS20-22 230V Wallmount
98235000SVS35-22 230V Wallmount
98250000SVS50-22 230V Wallmount

SVS75-22 230V Wallmount


Output Current20Amps35Amps50Amps75Amps
Case typeMetalMetalMetalMetal
Spike protectionYESYESYESYES
Dimension (mm)300 x 200 x 280330 x 330 x 440330 x 330 x 440330 x 330 x 440

Data sheet

  • Voltage Protection - Voltage Stabilizers